How to Connect / Bridge Two Router Wirelessly Using WDS Wireless Distribution System Settings
SOLVED: two modems on one connection? | OCAU Forums
The connection through the first modem may or may not continue to work, but if it does work at all, it will likely work badly. So don't even think about trying two DSL modems on the same phone line. If you need to share the internet connection between multiple computers, you need a broadband router. 7 Oct I have tried extenders in my two story house with no success so was wondering, can i plug two routers in the phone lines and will they both work? Happy to just have a . Attaching a Access Point to the end of the cable would be cheaper and work just as well, that way its on the same IP range. The only. Hello,I have a TP-Link wireless router connected to a DLink Modem with the phone line(adsl) connected which works fine can I connect another wireless modem router to that setup to get wireless in a.
I believe this is because the telephone line can accept only one mac address.
Need verification on this. If that is true, is there any way around. Or is there any way to spoof the mac address of any one modem.
One is Sitecom and the other is Dlink. I'd have to look that up but before I do, why are you doing this?
Do you already have an account? Sorry for the rant. Well I shall look into acquiring a range extender so that I get a better signal in my room!
I live in a house that is quite long. I tried using a wifi extender. But it did not work. I would have to use two or three. I do not have the house wired for cat6. Thanks for your interest. The simple answer is you can't. But have you looked into power line adapters?
They are a bit finicky but might be worth a look. I'd try to buy them locally Best Buy or Wal-Mart just to test if they work that way you don't have to wait for them, try them and if they don't work, then fight with an online store to return them.
If they work then see if it's worth buying them online and returning the others. I am in Mumbai, India and new houses are wired with three phase supply. So the phase in my living room and bedroom MAY be different. Therefore I doubt that power check this out adapters would work. The distance would be around 75 feet, but there are huge columns along the way.
I had used a Dlink extender, but even just outside the room the signal was dbm and lower. I know the short answer is NO. But I was hoping for some indirect way. In my earlier working I had changed the mac address of my network card directly through RTL software on the card, and not thru windows registry. I was hoping someone here would have a unique "spoof" for my problem.
Yes I said the simple answer because I don't feel like quoting all the web pages that explain why you can't. In a nut shell it isn't the MAC address it's the signals. You should have some sort of splitter that allows voice and DSL on the same line. Those DSL signals wouldn't work coming from 2 different modems. If power line won't work, you don't want to install cable, paying for 2 phone lines seems a bit expensive, perhaps moving the DSL modem to a more central location and trying the extender again OR using shorter cables.
The easy way is to just put one modem in a center location and a WIFI router from there. Mounting the router high or on a second floor would help extend that range. It is not the cost of the cat6 cable, but concealing it with the internal wiring that will cost a bomb The civil work. My Dlink router is U. Dlink extender was DIR So voice and data is split for each phone. So that should not be a problem. I agree it is a non-standard use, but I think that is the easiest way out, and wonder why nobody thought of that!
Two splitters in parallel have not caused any line degradation so far. Unfortunately I am on one floor only. I know higher is better, as I get weak signals from devices on the floors above me, mjdnova.
1 dsl connection using two modems
OK lets just stop with the 2 modem idea, it won't work. So lets concentrate on what will. A better wifi extender. Those wireless extenders plug directly into the power, unless you have http://datingfirst.me/p/what-does-hopelessly-in-love-mean.php outlets near the ceiling those will never work.
You need an extender that you can put up on a shelf, like this or this, although I would get one with external antennas. I am not recommending either of those over others I was just giving you examples of the type I would recommend. I would put the DSL device up on a shelf.
Then take a laptop, get it connected to your DSL device, and slowly walk away and into rooms until you lose the signal, then you'll know where it dies. Go back to where you are as far as you can get away from the DSL device but still have really good signal, it doesn't have to be full signal but it shouldn't be less than like 1 bar down and full signal would be better not going to lie. This is where I would put the extender. Up on click shelf.
And you don't want to daisy chain extenders. Many thanks for your keen advice CaveDweller2. I have tried putting the Dlink modem high up. But immediately outside the room the signal drops to one bar. Using an app on my mobile it shows to dbm. That seems to be the main hurdle.
Double or Triple Your Internet Speed - This Method Actually Works!
I would like you to point me to any website that would mention the "real" reason other than mac address as to why it would not work. But was not sure if it would increase the range dramatically.
It is the ISP [your internet provider] that http://datingfirst.me/p/taphouse-bar-and-grill-virginia-beach.php what modem is active. Should be possible if you paid for two accounts to have two modems. For example I have 3 Comcast cable internet accounts here at work which results in three modems but I only have one cable coming into the building.
You cannot use the phone lines to get routers to talk to each other you're best bet would be to buy a wireless network extender from harvey norman or you need to run a network cable from the router downstairs to the one upstairs and then you could use the second router upstairs. Perhaps a decent wireless setup, some new cabling or EoP adapter kit might be the answer? This is where I would put the extender. As such, it is not two simultaneous connections as with cable where you can just keep adding modems to every cable outlet in link house until the cableco's billing system maxes out on the number of modem MAC address they are willing to let you pay for.
Have you tried moving it to a different room? Get it as centrally located and as high as you can. My DSL device does wireless but just outside the room it sits in the signal almost dies.
So just on the other side of the wall up on a shelf there is a wireless router I use as an access point AP. It used to be a wireless bridge but I ran a cat6 cable so continue reading it's just a regular AP.
It covers almost my entire yard and easily the whole house. That access point still plugs into the wall socket which is going to be really low to the ground. Thanks for your feedback Wand3r3r. Here ADSL is given on 2 wire phone line. As I mentioned above, I use a splitter with each of my two telelphones on the line.
I can easily put a mains click here wire to get my router high up, for whichever device I use, but the columns seem to attenuate the wifi.
As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site. Click here to Register a free account now! Page 1 of 2 1 2 Next. Just curious what wifi extender did you use? Which dlink extender did you try? I had also tried Dlink DAP I was hoping for an "impossible spoof".
Maybe somethings are just impossible currently. As CaveDweller2 suggests you need link give up that train of thought.